Home/Services/Installation

Installation

Shelf, TV Mount and Furniture Installation in Rochester, NY

Our handyman hangs shelves, mounts TVs, installs curtain rods and door hardware, and assembles furniture in Rochester homes. What holds the item up is behind the wall, so we find the studs first. If the job needs a wire inside the wall, we say so.

  • Shelves and TV mounts
  • Furniture assembly
  • Written quote first
What we fix

What we install

Shelves and brackets

Fixed into studs or the right anchors.

TV mounts

Mounted to studs, with the weight checked.

Curtain rods

Level, and fixed where they will hold.

Door hardware

Knobs, handles, hinges and strike plates.

Furniture assembly

Beds, desks, shelving and cabinets from the box.

Towel bars and mirrors

Hung level and held with the right fasteners.

Causes and fixes

What is behind your wall decides the job

Wall typeRiskWhat we doCall someone else when
Drywall over wood studsAnchors alone can pull outFind the studs and fasten into themWiring or pipes run behind the spot
Plaster over wood lathPlaster cracks if drilled wrongCheck first, drill pilot holes, choose the fastenerThe plaster is loose or crumbling
Brick or concreteNeeds masonry fastenersUse masonry anchors and the right bitThe wall is damp or flaking
Hollow wall, no stud in reachA heavy item will not holdHang only light items, or add backingYou want a wire hidden inside the wall

A TV mount must go into studs. The Sanus mount manual says drywall alone will not hold the TV. It calls for wood studs at least a nominal 2 by 4, fasteners at least 16 inches apart, and four lag bolts that are not over tightened. That mount is rated for 125 pounds on wood studs. Always follow the manual that comes with your mount. Many Rochester homes are old, and NeighborhoodScout reports that more than half were built before 1940. Those homes often have plaster over lath, which needs extra care.

installation in Rochester NY: Handyman assembling furniture with a cordless drill and hardware laid out on the floor
Assembling furniture on site
The visit

How an installation visit works

  1. Tell usSay what you want hung or built, and where.
  2. CheckWe find studs, check the wall type and read the maker’s weight limit.
  3. InstallWe mark, drill and fasten, then check that it is level.
  4. FinishWe clean up and test the weight before we leave.
Safety and rules

Where installation ends and electrical work starts

Running a power wire inside a wall is electrical work. If you want a TV with no visible cords, ask us first. We tell you what we can do and when a licensed electrician is needed. Some minor tasks may be allowed, depending on the work and local requirements. Gas lines, electrical panels, new circuits and major plumbing work should be handled by the appropriate licensed professional. We explain when a licensed trade is needed before work starts.

Questions

Installation questions

Can a TV mount go into drywall alone?

No. The Sanus manual says drywall alone will not hold the TV. The mount needs wood studs.

Do you find the studs?

Yes. We locate the studs before we drill, and we check for wiring and pipes in the area.

Can you hang shelves on plaster walls?

Yes, with care. Plaster over lath can crack, so we drill pilot holes and choose the fastener for the wall.

Do you assemble furniture?

Yes. We assemble beds, desks, shelving and cabinets, and anchor tall pieces to the wall if you ask.

Do you install light fixtures?

Some minor tasks may be allowed, depending on the work and local requirements. We explain when a licensed electrician is needed before work starts.

Related services

Request a visit

Call 585.555.0142 and tell us about the job. We answer every call.

100 Sample Street, Rochester, NY 14604 | Hours: Monday–Saturday, 8:00 AM – 6:00 PM